Machines in stock

CA500

Rigid solid-cast bed artificially aged for stress relieving provides long-term stability of the machine accuracy. Solid metal spindle is assembled using high precision angular bearing (one duplex bearing in front and one – from the rear), it has reduced runout in axial and radial directions even while heavy duty cutting.

Spindle bore diameter	55 mm
Max. diameter of work piece to be installed over bed	500 mm
Max. diameter of work piece to be installed over carriage	290 mm

СА500 FLEX

The machine is balanced by characteristics with a very strong construction. The ability to upgrade an cycle control system to a full Fanuc CNC system without additional installation work, only by entering a service code.

Spindle bore diameter	55 mm
Max. diameter of work piece to be installed over bed	500 mm
Max. diameter of work piece to be installed over carriage	250 mm

СА500F2

Advanced cycle CNC control system, provides CNC functions efficiency, facilitates operator`s servicing, maintains manual contol by means of MPG and intermediate switch.

Spindle bore diameter	55 mm
Max. diameter of the workpiece to be installed over bed	500 mm
Max. diameter of the workpiece to be installed over carriage	290 mm

СА750F2K

Optimal design solution: rigid solid-cast bed, antibacklash linear slide roller bearing units, five precision angular contact bearings in the spindle unit, feed servo drives and ball screw instead of mechanical kinematic relations – all this ensures accuracy and reliability of the machine.

Spindle bore diameter	166 (102*) mm
Max. diameter of the workpiece to be processed over bed	800 mm
Max. diameter of the workpiece to be processed over carriage	450 mm

СА500F3/F4

CNC machines are designed for turning in the chuck and centers of parts with straight, step and curved profile. The range of spindle speed control allows processing of products made of both and non-ferrous metals and alloy steels.

Spindle bore diameter	55 mm
Max. diameter of the workpiece to be installed over bed	500 mm
Max. diameter of the workpiece to be processed over carriage	290 mm

СА600F3/F4

CNC machines are designed for turning in the chuck and centers of parts with straight, step and curved profile. The range of spindle speed control allows processing of products made of both and non-ferrous metals and alloy steels.

Spindle bore diameter	102 mm
Max. diameter of the workpiece to be installed over bed	560 mm
Max. diameter of the workpiece to be processed over carriage	320 mm

СА700F3/F4

Machines are designed for turning in the chuck and centers of parts with straight, step and curved profile. The range of spindle speed control allows processing of products made of both and non-ferrous metals and alloy steels.

Spindle bore diameter	140 mm
Max. diameter of the workpiece to be installed over bed	700 mm
Max. diameter of the workpiece to be processed over carriage	430 mm

CA1000F3/F4K

Solid cast iron cast iron bed with high damping characteristics.The backlash-free roller guides and the increased (50 mm) diameter of the ball screws with accuracy class C3 guarantee static and dynamic rigidity for a long service life.

Spindle bore diameter	166 (102*) mm
Max. diameter of the workpiece to be processed over bed	990 mm
Max. diameter of the workpiece to be processed over carriage	600 mm

HT500F3/F4

45° slant solid cast bed of grey cast with high damping features. Antibacklash linear slide roller bearing units and increased (50 mm) diameter of ball screw with accuracy grade С3 provide high static and dynamic rigidity during longterm operation. Increased spindle unit with five precision angular bearings provide machine accuracy and reliability.

Spindle bore diameter	102 (55, 166) mm
Max. diameter of the workpiece to be processed over bed	600 mm
Max. diameter of the workpiece to be processed over carriage	600 mm

СА1100F3/F4

Machines are designed for turning in the chuck and centers of parts with straight, step and curved profile. The range of spindle speed control allows processing of products made of both ferrous and non-ferrous metals and alloy steels.

Spindle bore diameter	180 mm
Max. diameter of the workpiece to be installed and processed over bed	1080 mm
Max. diameter of the workpiece to be installed and processed over carriage	660 mm

СА1250F3/F4

Machines are designed for turning in the chuck and centers of parts with straight, step and curved profile. The range of spindle speed control allows processing of products made of both ferrous and non-ferrous metals and alloy steels.

Spindle bore diameter	180 mm
Max. diameter of the workpiece to be installed and processed over bed	1265 mm
Max. diameter of the workpiece to be installed and processed over carriage	860 mm

CA983

Easy-to-use pipe-threading lathe designed for processing of long pipes and parts of pipe connections with a diameter of up to 340 mm, used for the production and transportation of oil and natural gas.

Spindle bore diameter	340 mm
Max. diameter of the workpiece to be processed over bed	830 mm
Max. diameter of the workpiece to be processed over carriage	450 mm

СА983F2

Cycle CNC version.The largest torque (up to 7625 Nm) on the spindle in its class. Designed for processing long pipes and parts of pipe connections with a diameter of up to 340 mm, used for the production and transportation of oil and natural gas.

Spindle bore diameter	340 mm
Max. diameter of the workpiece to be installed over bed	830 mm
Max. diameter of the workpiece to be processed over carriage	410 mm

СА983F3

CNC version. The largest torque (up to 7625 Nm) on the spindle in its class. Designed for processing long pipes and parts of pipe connections with a diameter of up to 340 mm, used for the production and transportation of oil and natural gas.

Spindle bore diameter	340 mm
Max. diameter of the workpiece to be installed over bed	830 mm
Max. diameter of the workpiece to be processed over carriage	410 mm

ВТ1200F3/F4

Solid cast slant-bed of high quality cast iron ensures high rigidity and vibration resistance. The milling function significantly expand the technological capabilities of the machine.

Facing plate diameter	1250 mm
Max. diameter of the workpiece to be processed	1350 mm
Max. height of the workpiece to be processed	1250 (1650) mm

ВТ2500F3/F4

Solid cast slant-bed of high quality cast iron ensures high rigidity and vibration resistance. The milling function significantly expand the technological capabilities of the machine.

Facing plate diameter	2500 mm
Max. diameter of the workpiece to be proccesed	2800 mm
Max. height of the workpiece to be proccesed	1600 (2000) mm

Machines in stock

Manually operated lathes

CA500

Lathes with cycle CNC control system